Panasonic KX-TDA50

Value Range
Off, On
Maintenance Console Location
6.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
None
Feature Manual References
None
Flexible Button Programming Mode
Specifies whether the extension user can modify all flexible buttons without limitation, or only the One
-touch
Dialing buttons. When the mode is set to One-touch Dial, there is no need to enter "2" before the number
when customizing a One-touch Dialing button.
Default
No Limitation
Value Range
No Limitation, One-touch Dial
Maintenance Console Location
6.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
None
Feature Manual References
None
ICM Tone
Selects the ring tone for incoming calls arriving at the INTERCOM button or PDN buttons. Note that the ring
tone specified here is applied to all PDN buttons on an extension.
Default
1
Value Range
KX-DT300 series (except KX-DT321
)/KX-T7600 series/IP-PT (except KX-NT265/KX-NT321): 1–30
KX-DT321/KX-NT265/KX-NT321: 1–8 (Even if ring tone 9–30 is selected, ring tone 1 is heard.)
Other telephones: 1–8 (Even if ring tone 9–30 is selected, ring tone 2 is heard.)
Document Version 2010-11 PC Programming Manual 511
6.1 [4-1-1] Wired Extension—Extension Settings