Panasonic KX-TDA50 - Page 584

Extension Name
Specifies the name of the PS.
Default
Not stored.
Value Range
Max. 20 characters
Maintenance Console Location
6.10 [4-2-1] Portable Station—Extension Settings
Programming Manual References
3.34 [1-2] Portable Station—
Extension Name
Feature Manual References
None
Outgoing Preferred Line
Selects the line to be seized after going off
-hook to make a call.
Default
For KX-TDA50:
ICM
For KX-TDA100/KX-TDA200/KX-TDA600:
ICM/PDN
Value Range
For KX-TDA50:
No Line: No line is seized.
Idle: An idle CO line is seized automatically from the programmed trunk groups.
ICM: An extension line is seized.
F-1–F-12: A CO line programmed for a flexible button (F-1–F-12) is seized. A flexible button customized as a
Single-CO, Group-CO, Loop-CO, or ICD Group button must be selected.
For KX-TDA100/KX-TDA200/KX-TDA600:
No Line: No line is seized.
Idle: An idle CO line is seized automatically from the programmed trunk groups.
ICM/PDN: An extension line is seized, or, for a PDN extension, an idle PDN button is selected.
F-1–F-12: A CO line programmed for a flexible button (F-1–F-12) is seized. A flexible button customized as a
Single-CO, Group-CO, Loop-CO, or ICD Group button must be selected.
Maintenance Console Location
6.10 [4-2-1] Portable Station—Extension Settings
584 PC Programming Manual Document Version 2010-11
6.10 [4-2-1] Portable Station—Extension Settings