Panasonic KX-TDA50

Parameter Selection (for TRS Level Change)
Specifies the TRS level to be used temporarily on a certain PS.
Default
1
Value Range
1–7
Maintenance Console Location
6.13 [4-2-3] Portable Station—Flexible Button
Programming Manual References
None
Feature Manual References
17.1.6 TRS (Toll Restriction)
4.1.4 Dial Tone Transfer
Parameter Selection (for Time Service - Automatic/Manual)
Specifies the Time Table to be used when the
Time Service Switching Mode is set to Automatic.
Default
1
Value Range
1–8
Maintenance Console Location
6.13 [4-2-3] Portable Station—Flexible Button
Programming Manual References
None
Feature Manual References
17.1.5 Time Service
Parameter Selection (for SDN) (KX-TDA100/KX-TDA200/KX-TDA600 only)
Specifies the delayed ringing setting for calls arriving at an SDN button.
The value specified here is only used when System Wireless—SDN Delayed Ringing with LCD
(KX-TDA100/KX-TDA200/KX-TDA600 only) on 4.17 [2-9] System Options is set to "Enable".
Default
Immediate
Document Version 2010-11 PC Programming Manual 613
6.13 [4-2-3] Portable Station—Flexible Button