Panasonic KX-TDA50

Maintenance Console Location
6.18 [4-3] DSS Console
Programming Manual References
None
Feature Manual References
17.1.6 TRS (Toll Restriction)
4.1.4 Dial Tone Transfer
Parameter Selection (for Time Service - Automatic/Manual)
Specifies the Time Table to be used when the
Time Service Switching Mode is set to Automatic.
Default
1
Value Range
1–8
Maintenance Console Location
6.18 [4-3] DSS Console
Programming Manual References
None
Feature Manual References
17.1.5 Time Service
Parameter Selection (for SDN) (KX-TDA100/KX-TDA200/KX-TDA600 only)
Specifies the delayed ringing setting for calls arriving at an SDN button.
Default
Immediate
Value Range
Immediate, 1 Ring, 2 Rings
, 3 Rings, 4 Rings, 5 Rings, 6 Rings, No Ring
Maintenance Console Location
6.18 [4-3] DSS Console
Programming Manual References
None
Document Version 2010-11 PC Programming Manual 635
6.18 [4-3] DSS Console