Panasonic KX-TDA50 - Page 643

Feature Manual References
17.1.5 Time Service
Optional Parameter (Ringing Tone Type Number) (for Loop CO, Single CO,
Group CO, ICD Group
, SDN)
Specifies the ring tone type.
Default
1
Value Range
KX-DT300 series (except KX-DT321)/KX-T7600 series/IP-PT (except KX-NT265/KX-NT321): 1–30
KX-DT321/KX-NT265/KX-NT321: 1–8 (Even if ring tone 9–30 is selected, ring tone 1 is heard.)
Other telephones: 1–8 (Even if ring tone 9–30 is selected, ring tone 2 is heard.)
Maintenance Console Location
6.18 [4-3] DSS Console
Programming Manual References
None
Feature Manual References
None
Optional Parameter (Ringing Tone Type Number) (for Call Park)
Specifies
the number of the parking zone a call is to be parked in when a Call Park button with
Parameter
Selection (for Call Park) on this screen set to Specific is pressed.
Default
0
Value Range
0–99
Maintenance Console Location
6.18 [4-3] DSS Console
Programming Manual References
None
Feature Manual References
3.1.5 Call Park
Document Version 2010-11 PC Programming Manual 643
6.18 [4-3] DSS Console