Panasonic KX-TDA50 - Page 646

Programming Manual References
6.18 [4-3] DSS Console—Display Option—Key Setting— Parameter Selection (for Single CO)
6.18 [4-3] DSS Console—Display Option
—Key Setting—
Parameter Selection (for Group CO)
6.18 [4-3] DSS Console—Display Option
—Key Setting—
Parameter Selection (for Call Park)
6.18 [4-3] DSS Console—Display Option
—Key Setting—
Parameter Selection (for Log-in/Log-out)
6.18 [4-3] DSS Console—Display Option
—Key Setting—
Parameter Selection (for Time Service)
6.18 [4-3] DSS Console—Display Option
—Key Setting—
Parameter Selection (for TRS Level Change)
6.18
[4-3] DSS Console—Display Option—Key Setting—
Parameter Selection (for Time Service - Automatic/
Manual)
6.18 [4-3] DSS Console—Display Option
—Key Setting—
Parameter Selection (for SDN) (KX-TDA100/
KX-TDA200/KX-TDA600 only)
Feature Manual References
None
Parameter 2
This parameter is equivalent to Optional Parameter (Ringing Tone Type Number) on the Key Setting
screen.
Maintenance Console Location
6.18 [4-3] DSS Console
Programming Manual References
6.18 [4-3] DSS Console—Display Option—Key Setting— Optional Parameter (Ringing Tone Type Number)
(for Time Service)
6.18
[4-3] DSS Console—Display Option—Key Setting—
Optional Parameter (Ringing Tone Type Number)
(for Loop CO, Single CO, Group CO, ICD Group, SDN)
6.18
[4-3] DSS Console—Display Option—Key Setting—
Optional Parameter (Ringing Tone Type Number)
(for Call Park)
Feature Manual References
None
Mailbox Number
This parameter is equivalent to Ext No. of Mailbox on the Key Setting screen.
Maintenance Console Location
6.18 [4-3] DSS Console
Programming Manual References
6.18 [4-3] DSS Console—Display Option
—Key Setting—
Ext No. of Mailbox (for Two-way Transfer)
646 PC Programming Manual Document Version 2010-11
6.18 [4-3] DSS Console