Panasonic KX-TDA50 - Page 663

Default
Enable
Value Range
Disable, Enable
Maintenance Console Location
7.3 [5-3-1] Voice Message—DISA System
Programming Manual References
None
Feature Manual References
None
Option 2
DISA Cyclic Tone Detection
Selects the cyclic tone detection mode. Cyclic tone detection is used to determine the end of a call for a DISA
CO-to-CO line conversation established through an analog CO line.
To apply changes to this setting, follow the steps below:
1. Change this setting.
2. Set the status of the MSG/ESVM card (KX-TDA50) or OPB3 card (KX-TDA100/KX-TDA200/KX-TDA600)
to "OUS", then "INS".
Default
Fixed
Value Range
Fixed: The number of times of a tone pattern (a set of tone-on and tone-off) that the PBX receives is fixed to
4 times in the ranges of:
A
B
C
D
C
C
D D
A
,
B
= 100–1300 ms,
C
=
A
90 ms,
D
=
B
90 ms
Option: The tone pattern that the PBX receives is optional as specified in DISA Cyclic Tone Option on this
screen.
Maintenance Console Location
7.3 [5-3-1] Voice Message—DISA System
Programming Manual References
3.27 [1-1] Slot—OPB3 Card Property (KX-TDA100/KX-TDA200/KX-TDA600 only)
Document Version 2010-11 PC Programming Manual 663
7.3 [5-3-1] Voice Message—DISA System