Panasonic KX-TDA50

Value Range
Max. 20 characters
Maintenance Console Location
8.1 [6-1] System Speed Dial
Programming Manual References
None
Feature Manual References
16.1.4 Speed Dialing, System
CO Line Access Number + Telephone Number
Specifies the telephone number (including the CO Line Access number) or feature number assigned to the
System Speed Dialing number.
Default
Not stored.
Value Range
Max. 32 digits (consisting of 0–
9, *, #, T [Transfer], [ ] [Secret], P [Pause], and F [Flash])
Maintenance Console Location
8.1 [6-1] System Speed Dial
Programming Manual References
None
Feature Manual References
16.1.4 Speed Dialing, System
CLI Destination
Specifies
the CLI destination (extension) to which incoming calls from the programmed telephone number are
routed. If a Caller ID Modification Table is being used, the modified number must match the telephone number
above (CO Line Access Number + Telephone Number) in order for the call to be routed correctly.
Default
Not stored.
Value Range
Max. 5 digits (consisting of 0–9)
Document Version 2010-11 PC Programming Manual 685
8.1 [6-1] System Speed Dial