Panasonic KX-TDA50 - Page 773

Default
1 bit
Value Range
1 bit, 2 bit
Maintenance Console Location
13.1 [11-1] Main
Programming Manual References
None
Feature Manual References
16.1.1 SMDR (Station Message Detail Recording)
External Modem Command—Automatic Initialization
Specifies
the command to automatically initialize an external modem when it is plugged into the Serial Interface
(RS-232C) port of the PBX.
Default
AT&F0Q0E0V1S0=1X0&D0
Value Range
Max. 30 characters
Maintenance Console Location
13.1 [11-1] Main
Programming Manual References
None
Feature Manual References
13.1.6 PC Programming
External Modem Command—Manual Initialization 1–Manual Initialization 5
Specifies the command to manually initialize an external modem. The command specified here is controlled
by PT system programming (External Modem Control [801]).
Default
Not stored.
Value Range
Max. 30 characters
Document Version 2010-11 PC Programming Manual 773
13.1 [11-1] Main