Panasonic KX-TDA50 - Page 777

Remote
Remote—Analog Remote (Modem) Floating Extension Number
Specifies
the floating extension number for analog remote maintenance. To enable this setting, an RMT card
must be installed, and
Remote—Remote Programming on this screen must be enabled.
Default
599
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
13.1 [11-1] Main
Programming Manual References
None
Feature Manual References
13.1.6 PC Programming
Remote—Remote Programming
Enables system programming, diagnosis, and data upload from a remote location.
Default
Enable
Value Range
Disable, Enable
Maintenance Console Location
13.1 [11-1] Main
Programming Manual References
None
Feature Manual References
13.1.6 PC Programming
Remote—Password Lock Counter for Remote Programming
Specifies the number of successive incorrect password entries allowed before remote access is locked.
Default
None
Document Version 2010-11 PC Programming Manual 777
13.1 [11-1] Main