Panasonic KX-TDA50 - Page 91

Programming Manual References
None
Feature Manual References
None
XDP Mode
Turns XDP mode on or off for the port. This setting is only available when Port Type on this screen is set to
S-Hybrid.
Default
Off
Value Range
On: XDP enabled (The main telephone and sub telephone have different extension numbers. This is called
XDP Mode.)
Off:
XDP disabled (The main telephone and sub telephone both have the main telephone’s extension number.
This is called Parallel Mode.)
Maintenance Console Location
3.5 [1-1] Slot—Port Property - Extension Port
Programming Manual References
None
Feature Manual References
13.1.2 Paralleled Telephone
5.1.7 Extension Port Configuration
Parallel Telephone Ringing
Specifies
whether the sub telephone (SLT) rings at the same time as the main telephone (DPT) for an incoming
call. This setting is only available when Port Type on this screen is set to S-Hybrid.
Default
Yes
Value Range
Yes, No
Maintenance Console Location
3.5 [1-1] Slot—Port Property - Extension Port
Programming Manual References
None
Document Version 2010-11 PC Programming Manual 91
3.5 [1-1] Slot—Port Property - Extension Port