Panasonic KX-TDA50 - Page 93

message is displayed showing the slot and port number for which SDN buttons will be deleted. If you do not
wish to delete SDN buttons for this port, click Cancel.
Default
1
Value Range
For KX-TDA50:
Location number for DSS Console: 1
–4
Location number for PC Console: 1, 2
For KX-TDA100/KX-TDA200:
1–8
For KX-TDA600:
Location number for DSS Console: 1–64
Location number for PC Console: 1–8
Maintenance Console Location
3.5 [1-1] Slot—Port Property - Extension Port
Programming Manual References
None
Feature Manual References
3.1.22 CTI (Computer Telephony Integration)
DPT Type—VM Unit No.
Selects
the unit number of the connected VPS. This setting is only available when
DPT Type—
Type on this
screen is set to VM (DPT).
Default
1
Value Range
For KX-TDA50:
1
For KX-TDA100/KX-TDA200:
1, 2
For KX-TDA600:
1–8
Maintenance Console Location
3.5 [1-1] Slot—Port Property - Extension Port
Document Version 2010-11 PC Programming Manual 93
3.5 [1-1] Slot—Port Property - Extension Port