7. Drive/Shutter
146
4
Close the menu.
≥Press the shutter button halfway.
5
Start recording.
≥Press the shutter button fully.
0
When [Start Time Set] is set, the camera
will enter into sleep status until the start
time is reached.
0 During recording standby, the camera enters into sleep status when no
operation is performed for a certain period of time.
0 The recording will stop automatically.
6
Create a video. (l 151)
0 After the recording has stopped, select
[Yes] on the confirmation screen to
proceed to create a video.
Even if you select [No], you can still
create a video with [Time Lapse Video] in
the [Playback] ([Process Image]) menu.
(l 364)
[Start Time]
[Now]
Starts recording when the shutter
button is pressed fully.
[Start Time Set] Starts recording at the set time.
[Image Count]/
[Shooting
Interval]
Sets the number of pictures and the recording interval to
be taken.
0 [Shooting Interval] is not displayed when [Shooting
Interval Setting] is set to [OFF].
[Exposure
Leveling]
Adjusts the exposure automatically to prevent large
changes in brightness between adjacent frames.
To Next Page
Loading...
