17. Materials
459
First, try out the following procedures (l 459 to 469).
0
[Power Save Mode] is enabled. (l 44)
0 When [6K/4K Pre-Burst] or [Pre-Burst Recording] is set, the battery drains faster.
Set these settings only when recording.
0 When connected to Wi-Fi, the battery drains quickly.
Turn the camera off frequently such as by using [Power Save Mode] (l 44).
Troubleshooting
If the problem is not resolved, it may be improved by selecting
[Reset] (l 76) on the [Setup] ([Setting]) menu.
Power, Battery
The camera turns off automatically.
The battery becomes flat too quickly.
To Next Page
Loading...
