Panasonic Lumix S1R User Manual

17. Materials
460
0 In high ambient temperatures or if the camera is used for continuous recording, the
temperature of the camera will rise.
To protect the camera against a rise in temperature, after [ ] is displayed,
recording will be stopped, and the following functions will not be available for a time.
Wait until the camera cools down.
– [6K/4K PHOTO]
– [Post-Focus]
– Video recording
– [AF-Point Scope]
– HDMI output
– Power supply via the USB connection cable
0 If [Focus/Shutter Priority] is set to [FOCUS], then recording will not take place until
focus is achieved. (l 329)
0 Images may look whitish when the lens or image sensor gets dirty with fingerprints or
similar.
If the lens is dirty, turn the camera off, then wipe the lens surface with a soft, dry
cloth.
For information about how to clean the image sensor, refer to page 472.
0 Ensure AE Lock is not set where it is not appropriate. (l 191)
Recording
Recording stops before finishing.
Cannot record.
Cannot use some functions.
Cannot record images.
The shutter will not operate immediately when the shutter button is
pressed.
The recorded image is whitish.
The recorded image is too bright or dark.

Panasonic Lumix S1R Specifications

General

Sensor Resolution	47.3MP
Sensor Type	Full-frame CMOS
ISO Sensitivity	100-25600 (expandable to 50-51200)
Image Processor	Venus Engine
Image Stabilization	5-axis in-body image stabilization
Camera Type	Mirrorless
Sensor Size	36 x 24 mm
Lens Mount	L-Mount
Shutter Speed	1/8000 to 60 sec, Bulb
Connectivity	Wi-Fi, Bluetooth
Battery	DMW-BLJ31 Lithium-Ion
Dimensions	148.9 x 110.0 x 96.7 mm
Autofocus System	Contrast Detection AF System with DFD Technology
Viewfinder	5.76 million dots OLED EVF
LCD Screen	3.2-inch, 2.1 million dots, touch screen
Video Recording	4K up to 60p
Continuous Shooting	9 fps (AFS/MF), 6 fps (AFC)
Weather Sealing	Yes
Memory Card Slots	2x SD Card Slots (1x UHS-II Compatible)