17. Materials
461
0 When drive mode is set to [ ] (Burst Shot 1) or [ ] (Burst Shot 2), pressing
and holding the shutter button will take burst pictures. (l 125)
0 When bracketing is set, then pressing the shutter button records multiple images
while automatically changing the settings. (l 155)
0 Confirm the following details:
– Is the subject outside of the focus range?
– Is [Shutter AF] set to [OFF]? (l 332)
– Is [Focus/Shutter Priority] set to [RELEASE]? (l 329)
– Is AF Lock (l 191) set where it is not appropriate?
0 The shutter speed will become slower and the stabiliser function may not work
properly when recording in dark places.
In these cases, use a tripod and the self-timer when recording.
0 Try the following:
– Reduce the ISO sensitivity. (l 192)
– Increase [Noise Reduction] of [Photo Style] to the positive direction, or adjust each
item other than [Noise Reduction] to the negative direction. (l 201)
– Set [Long Exposure NR] to [ON]. (l 306)
0 When a moving subject is recorded while using the following functions, the subject
may appear distorted in the picture:
– [ELEC.]
– Video recording
– [6K/4K PHOTO]
This is a characteristic of the CMOS sensor that is the image sensor of the camera,
and is not a malfunction.
Multiple images are recorded at once.
The subject is not focused properly.
The recorded image is blurred.
The stabiliser is not effective.
The recorded image looks rough.
Noise appears on the picture.
The subject appears distorted on the image.
To Next Page
Loading...
