Panasonic Lumix S1R

Firmware Ver. 1.3
F-19
[Off (Disable Press and Hold)] Has Been Added to [Fn
Button Set]
A setting item has been added that disables display of the function
registering screen even when you press and hold the Fn button.
¨ [ ] ¨ [ ] ¨ Select [Fn Button Set]
[Setting in REC mode] ¨ [3] tab: [Others]
[Setting in PLAY mode] ¨ [2] tab: [Others]
[Preview Aperture Effect] Has Been Added to [Fn
Button Set]
An Fn button function has been added so that you can preview the
aperture effect.
¨ [ ] ¨ [ ] ¨ [Fn Button Set] ¨ Select [Setting in REC mode]
[2] tab: [Monitor / Display]
0 These cannot be registered to [Fn3] to [Fn7].
[Off (Disable Press and
Hold)]
The button does not work as an Fn button.
The function registering screen is not displayed
when you press and hold (2 seconds) the Fn button.
0 The firmware update has changed the default setting for [Fn6] and [Fn7] in
[Setting in REC mode] from [No Setting] to [Off (Disable Press and Hold)].
[Preview Aperture Effect]
The aperture effect can be previewed while the Fn
button is being pressed.