13. Camera Customisation
302
Saves the camera’s settings information to the card.
Saved settings information can be loaded to the camera, letting you set the
same settings on multiple cameras.
¨ [ ] ¨ [ ] ¨ Select [Save/Restore Camera Setting]
Settings: [Card Slot 1(XQD)]/[Card Slot 2(SD)]
[Save/Restore Camera Setting]
[Save]
Saves the camera’s settings information to the card.
0 If saving new data, then select [New File], and if overwriting an
existing file, select that existing file.
0 When [New File] is selected, a screen to select the file name
to save as is displayed.
[OK] Saves using the file name on the screen.
[Change the file
name]
Changes the file name and saves the file.
0 Available characters: alphabetic
characters (upper-case), numerals, up
to 8 characters
0 For information on how to enter
characters, refer to page 369.
[Load] Loads settings information on a card onto the camera.
[Delete] Deletes settings information on the card.
0 Only settings information from the same model can be loaded.
0 Up to 10 instances of settings information can be saved on one card.
0 List of functions for which saving of settings information is possible (l 485)
To Next Page
Loading...
Need help?
General
