10. Flash
226
You can use a Flash (DMW-FL580L/DMW-FL360L/DMW-FL200L:
optional) to record using a wireless flash.
You can separately control the firing of three flash groups and the flash
attached to the hot shoe of the camera.
Placing a Wireless Flash
Place the wireless flash with its wireless sensor facing the camera.
Recording Using a Wireless Flash
Placement example
When C is placed to erase the
shadow in the background of the
subject that the flash groups A and B
will create
Placement range
When DMW-FL360L is attached
0 The placement range serves as a guide for when recording with the camera
held horizontally. The range differs depending on the surrounding
environment.
0 We recommend using a maximum of three wireless flashes in each group.
0 If the subject is too close, communication light may affect the exposure.
You can reduce the effect by setting [Communication Light] to [LOW] or
lowering the output with a diffuser or similar device. (l 229)
A
B
C
5m
5m
7m
7m
50°50°
50°50°
30°30°
30°30°
To Next Page
Loading...
