F-40
Firmware Ver. 1.8
You can now set on the menu, whether or not to record the camera’s
vertical orientation information during video recording.
¨ [ ] ¨ [ ] ¨ Select [Vertical Position Info (Video)]
When using an AC adaptor (DMW-AC10: optional), it is now possible to set
the [Power Save Mode].
[Vertical Position Info (Video)] Has Been
Added
[ON]
Records vertical orientation information. Videos recorded with
the camera held vertically will be automatically played vertically
on the PC or smartphone etc. during playback.
[OFF] Does not record vertical orientation information.
Support for the [Power Save Mode]
When Using an AC Adaptor
To Next Page
Loading...
