12. Playing Back and Editing of Images
276
Divide a recorded video or 6K/4K burst file into two.
1
Select [Video Divide].
≥ ¨ [ ] ¨ [ ] ¨ [Video
Divide]
2
Select and play the images.
≥Press 21 to select an image and
then press or .
3
Pause playback at the position
you wish to divide.
≥Press 3.
0
To fine-adjust the position, press 21
(frame-by-frame forward or frame-by-
frame rewind).
4
Divide the video.
≥Press 4.
[Video Divide]
0 Images cannot be returned to their original state once they have been divided.
Carefully confirm the images before performing the divide operation.
0 Do not remove the card or battery from the camera during the divide process.
The images may be lost.
0 Dividing the video at a point close to the start or end may not be possible.
0 Videos with a short recording time cannot be divided.
6HW
To Next Page
Loading...
