15. Wi-Fi/Bluetooth
421
This configures the settings required for the Wi-Fi function.
The settings cannot be changed when connected to Wi-Fi.
Displaying the [Wi-Fi Setup] menu.
≥ ¨ [ ] ¨ [ ] ¨ [Wi-Fi] ¨ [Wi-Fi Setup]
[Wi-Fi Setup] Menu
[Priority of Remote
Device]
This sets either the camera or the smartphone as the
priority control device to be used during remote
recording. (l 385)
[Wi-Fi Password]
You can use a password to connect for enhanced
security. (l 379)
[LUMIX CLUB]
This acquires or changes the “LUMIX CLUB” login ID.
(
l 423)
[PC Connection]
You can set the workgroup.
To send images to a PC, you need to connect to the
same workgroup as the destination PC.
(The default setting is “WORKGROUP”.)
0 To change the workgroup name, press or
and enter the new workgroup name.
For information on how to enter characters, refer to
page 369.
0 To return to the default settings, press [DISP.].
[Device Name]
You can change the name (SSID) of the camera.
0 To change the SSID, press [DISP.] and enter the
new SSID name.
For information on how to enter characters, refer to
page 369.
0 A maximum of 32 characters can be entered.
To Next Page
Loading...
