7. Drive/Shutter
164
Selecting the Focus Position for the Picture to Save
1
Select a Post-Focus image on
the playback screen. (l 259)
≥Select an image with the [ ]
icon and then press 3.
≥You can also perform the same
operation by touching the [ ]
icon.
2
Touch the point to be brought
into focus.
0 When the point is in focus, a green frame
appears.
0 If there is no picture with the selected
point in focus, a red frame appears.
A picture cannot be saved.
0 The edge of the screen cannot be selected.
3
Save the picture.
≥Touch [ ].
0
The picture is saved in JPEG format.
To Next Page
Loading...
