13. Camera Customisation
279
Register Functions to the Fn Buttons
1
Select [Fn Button Set].
≥ ¨ [ ] ¨ [ ] ¨ [Fn Button
Set] ¨ [Setting in REC mode]/
[Setting in PLAY mode]
2
Select the button.
≥Press 34 to select the button and
then press or .
≥Selection is also possible by
rotating or .
0 Press [DISP.] to display [Fn1] to [Fn16].
When [Setting in PLAY mode] is selected, only [Fn1] to [Fn2] are displayed.
3
Find the function to register.
≥Rotate to select the sub tab
where the function to register is
categorised (l 281, 284) and then
press or .
≥You can also select by pressing 2
to select the sub tab, pressing 34
or rotating , and then pressing 1.
≥Switch the [1] to [3] tabs by pressing [Q].
0 With default settings, [Fn8] to [Fn12] on the joystick cannot be used.
When using functions, set the [Joystick Setting] to [Fn]. (l 337)
To Next Page
Loading...
