7. Drive/Shutter
169
This disables all operation sounds and light output at once.
The audio from the speaker will be muted and the flash and the AF assist
lamp will be set to forced off mode.
0
The following settings are fixed:
– [Flash Mode]: [Œ] (Forced Flash Off)
– [AF Assist Light]: [OFF]
– [Shutter Type]: [ELEC.]
– [Beep Volume]: [ ] (OFF)
– [AF Beep Volume]: [ ] (OFF)
– [E-Shutter Vol]: [ ] (OFF)
¨ [ ] ¨ [ ] ¨ Select [Silent Mode]
Settings: [ON]/[OFF]
[Silent Mode]
0 Even when [ON] is set, the following function lights/blinks:
– Card access lamp
– Self-timer lamp
– Status LCD Backlight
– Illumination button
0 Use this function at your own responsibility sufficiently considering the privacy,
portrait, and other rights of subjects.
0 You can register functions to Fn buttons:
[] ¨ [ ] ¨ [Fn Button Set] ¨ [Setting in REC mode] ¨ [Silent Mode]
(l 278)
To Next Page
Loading...
