15. Wi-Fi/Bluetooth
390
Transferring Recorded Images
Automatically
You can automatically transfer recorded pictures to a smartphone as they
are taken.
Getting started:
0 Connect the camera to a smartphone by Bluetooth. (l 374)
1
Enable [Auto Transfer] on the
camera.
≥ ¨ [ ] ¨ [ ] ¨ [Bluetooth]
¨ [Auto Transfer] ¨ [ON]
0
If a confirmation screen is displayed on
the camera asking you to terminate the
Wi-Fi connection, select [Yes] to terminate it.
2
On the smartphone, select [Yes].
0 (iOS devices) When a message to confirm the change of destination is
displayed, select [Join].
0 The camera automatically makes a Wi-Fi connection.
3
Check the send settings on
the camera and then press
or .
0 To change the send setting, press
[DISP.]. (l 419)
0 The camera will enter a mode where it
can automatically transfer images and
[ ] will be displayed on the recording screen.
(If the settings are not displayed, then automatic image transfer is not
possible. Check the status of the Wi-Fi connection to the smartphone.)
Wi-FiBluetooth
To Next Page
Loading...
