Panasonic Lumix S1R

12. Playing Back and Editing of Images
275

Displaying a Comparison Screen
You can change a setting while checking the effect by displaying images
with the applied setting value side by side.
1
Press [DISP.] in the screen of Step
4
.
0
The image with the current setting A is
displayed at the centre.
0 Touching the image with the current setting
enlarges it.
Touching [ ] returns to the original
display.
0 A comparison screen cannot be displayed
while [Noise Reduction] or [Sharpness] is
selected.
2
Rotate , , or to change the setting.
3
Press or to confirm the setting.
0 RAW images recorded with the camera are always recorded in the [L] size of
[3:2].
With this function, images are processed with the aspect ratio and the angle of
view of [Ex. Tele Conv.] from the time of recording.
0 When images recorded enlarged with [Ex. Tele Conv.] are processed, they
cannot be processed with a [Picture Size] setting that is larger than the size at
the time of recording.
0 The [White Balance] item is fixed to the setting from the time of recording for
pictures recorded with multiple exposures.
0 The [Brightness correction] effect differs from the effect of exposure
compensation during recording.
0 The results of RAW processing with this function and with the “SILKYPIX
Developer Studio” software do not completely match.
0 RAW processing cannot be performed on the following types of RAW images:
– Images recorded with the [High Resolution Mode]
– Images recorded with devices other than this camera
0 You can register functions to Fn buttons:
[] ¨ [ ] ¨ [Fn Button Set] ¨ [Setting in PLAY mode] ¨ [RAW
Processing] (l 278)
DISP.
0