Panasonic Lumix S1R

14. Menu Guide
365
[Add/Delete Info.] ¨ ¨
[Protect]
[Single]/[Multi]/[Cancel]
You can set protection for images so that they will not be
deleted by mistake.
However, if you format the card, the protected images will
also be deleted.
0 For information about how to select images, refer to page
362.
0 [Cancel] only allows to cancel settings at once for the
images in a single card.
0 Be careful because the [Protect] setting may be disabled
on a device other than this camera.
0 This menu item can be registered to the Fn button.
(l 278)
[Rating]
[Single]/[Multi]/[Cancel]
If you set any of the five different rating levels for images,
you can do the following:
0 Deleting all images except for those with ratings.
0 Check the rating level in the file details display in operating
systems such as Windows 10, Windows 8.1, and
Windows 8. (JPEG images only)
1 Select an image. (l 362)
2 Press 21 to select a rating level (1 to 5) and then
press or .
0 When [Multi] is selected, repeat Steps 1 and 2.
0 To cancel the setting, set the rating level to [OFF].
0 [Cancel] only allows to cancel settings at once for the
images in a single card.
0 AVCHD videos can be set to “5” only.
0 This menu item can be registered to the Fn button.
(l 278)