Panasonic Lumix S1R

15. Wi-Fi/Bluetooth
380
Manually entering a password to connect
1
Display the screen in Step
2
on page 379.
2
In the setting menu of the smartphone,
turn the Wi-Fi function ON.
3
On the Wi-Fi setup screen, select the
SSID (B) displayed on the camera.
4
(At the first connection)
Enter the password (B) displayed on
the camera.
5
On the smartphone, start up “LUMIX
Sync ”.
0 (iOS devices) If the Wi-Fi connection fails, follow the message displayed to
allow connection to the camera. If you still cannot connect, select the SSID of
the camera on the Wi-Fi setup screen of the smartphone to connect. If the
SSID is not displayed, turn off and on the camera, then perform the Wi-Fi
connection settings again.
Wi-Fi
Wi-Fi
XXXXXXXX
i
i