15. Wi-Fi/Bluetooth
406
3
Connect the camera to a
printer by Wi-Fi.
≥Select [Via Network] (l 412) or
[Direct] (l 416), and then connect.
4
Select the destination printer.
5
Select and print images.
0 The procedure for selecting images is the same as the one for when the USB
connection cable is connected. (l 442)
0 To terminate the connection, press [ ].
0 You can also end the connection by pressing the Fn button assigned with
[Wi-Fi].
For information about the Fn button, refer to page 278.
0 For details about PictBridge (wireless LAN-compatible) printers, contact their
manufacturers.
0 When [Auto Transfer] in [Bluetooth] is set to [ON], [Wi-Fi Function] is not
available.
To Next Page
Loading...
