5. Image Recording
86
Note on RAW
RAW format refers to a data format of images that have not been processed on
the camera.
Playback and editing of RAW images require the camera or the dedicated
software.
0 You can process RAW images on the camera. (l 271)
0 Use software (“SILKYPIX Developer Studio” by Ichikawa Soft Laboratory) to
process and edit RAW files on a PC. (l 430)
0 Pictures taken with [RAW] cannot be displayed enlarged to the maximum
magnification during playback.
Take pictures with [RAWiFINE] or [RAWiSTD.] if you want to check their
focus on the camera after recording.
0 RAW images are always recorded in the [L] size of the [3:2] aspect ratio.
0 When you delete an image recorded with [RAWiFINE] or [RAWiSTD.] on
the camera, both the RAW and JPEG images will be deleted simultaneously.
0 [Picture Quality] is not available when the following functions are being used:
– [6K/4K PHOTO]/[Post-Focus]
– [High Resolution Mode]
– [Multiple Exposure]
0 You can register functions to Fn buttons:
[] ¨ [ ] ¨ [Fn Button Set] ¨ [Setting in REC mode] ¨ [Picture Quality]
(l 278)
To Next Page
Loading...
