6.3.2 GENERAL MAINTENANCE
Perform a visual inspection of the disk drive for
loose electrical connections, dirt, cracks,
binding, excessive wear, and loose hardware while conducting any maintenance function.
Cleanliness is essential for proper operation. Minute particles
of
dirt trapped between the
flying heads and the disk causes the disk surface to become scored. This condition may
result in
an
unusable disk or head damage, or both.
Accumulated foreign matter can also cause the read/write heads
to
fly
at
an
excessive
distance from the disk surface. This
will severely impair the retrieval of data and result in
improper writing.
6.3.3 GENERAL
PRECAUTIONS
Any work performed
on
the drive should
be
accomplished with the power
off
and,
preferably, with the power cord disconnected from the power line unless otherwise
necessary.
CAUTION
THE DISK DRIVE POSITIONER
ASSEMBL
Y
CONTAINS
A
PERMANENT
MAGNET;
KEEP
ALL
ITEMS
MADE
OF
FERROUS MA TERIALS [TOOLS, WRIST
WA
TCHES,
RINGS, ETC.]
AWA
Y
FROM
THIS
AREA.
WARNING
AVOID
PLACING
HANDS
IN
THE VICINITY OF THE
CARTRIDGE
OR VOICE COIL
WHEN
THE
DISK
DRIVE
IS OPERA TING.
AN
EMERGENCY
UNLOAD
OF THE
MAGNETIC
HEADS
COULD
CAUSE
SERIOUS
INJURY
TO
MAINTENANCE
OR OPERATING PERSONNEL.
CAUTION
CIGARETTE
SMOKE
AND
TOBACCO
ASHES
ARE
A
COMMON
CAUSE
OF
PROBLEMS
INDUCED DURING
SERVICING.
AVOID
SMOKING
IN
THE
IMMEDIA
TE
VICINITY WHEN SERVICING THE DRIVE WITH THE
COVER
OFF
OR THE
AIR
FILTER REMOVED.
NOTE
A void operating the disk drive with the top cover removed
unless maintenance cannot be performed otherwise.
If
the
disk drive
must
be
operated with the dust cover off, use a
work cartridge.
6.4
CLEANING THE DISK DRIVE
The disk drive requires cleaning in these major areas: heads, disks, spindle, positioner,
base casting, dust cover, and filters. Details are given in Paragraphs 6.4.1 through 6.4.5,
and 6.26, respectively.
The following cleaning materials are recommended for use when cleaning the disk drive.
(1)
Lint-free wiper such
as
Microwipes TX500* or Absorband TX404*
or
Kaydry
Disposable Wipes
34720* * or equivalent.
* Available from Texwipe Co., Hillsdale, New Jersey 07642.
* * Available from Kimberly-Clark.
6-3
8300