49
Input H. angle and press [ENT] to view the RESULT OF COORD. CALCULATE screen.
The second point Coordinates are displayed by plus or minus from the known Coordinates.
Press [ENT] to view the following screen.
The PN, X, Y, Z and PC are viewed and can be edited.
If all items are OK, press [F5][ACCEPT] to save them.
8.1.3 CIRCLE RADIUS
The center point and radius of the circle drawn by three points are calculated by this function.
You can store calculated center point.
Input: 3 points
Output: Center point of the arc
Radius of the arc
From the PowerTopoLite screen, press [F2][CALC] to view the CALCULATION screen.
P2
P3
P1
Radius
Center P
To Next Page
Loading...
