72
Press [ENT] to view the COORD. ON THE VIRTUAL PLANE screen.
Aim at your desired point and press [ENT]. The Coordinates, which you aim at, are displayed.
Press the [F1][POINT3] to view the MEASURE screen.
Aim at point 3 and press [F1][MEAS] . Measured Coordinates are displayed.
Press [ENT] to view the COORD. ON THE VIRTUAL PLANE screen
Aim at your desired point and press [ENT]. The Coordinates, which you aim at, are displayed.
Pressing [F4][EDIT] can edit the point name and prism height.
To Next Page
Loading...
