Applying Postage Using The Weighing Platform
1. Make sure the scale is activated (you will see "0 kg and 0 gm" on the display). See Turning Scale
On or Off to turn your scale on if necessary.
2. Place mail piece on weighing platform. The weight of the mail piece will appear on the top-line of
the display and valid classes and rates for this weight are displayed.
3. Select the desired class by pressing the key next to the class name (use the scroll keys to see
additional classes). If you are unsure if a particular class is valid for your mail piece, call your local
post office or www.canadapost.ca.
4. If there is no value next to the class name, more information is needed. Follow the prompts for the
options and/or services available for this class of service. The last screen shows "Services" and
lists special services such as COD and Insurance.
5. Select Done when finished entering all the class options and fees.
6. If using the moistener, place flap along moistener and move towards the right.
Running Mail
Pitney Bowes Operator Guide February, 2017 Page 43 of 226
To Next Page
Loading...
