About Meter Updates and Inspections
When you connect to the Pitney Bowes Data Centre, refer to How You Connect to the PB Data Centre
to add postage or perform other transactions, the Data Centre may activate other downloads while the
machine is connected.
If a system/postal update or download is available the system displays a message:
l If a download is not mandatory, you are prompted to either “Get Update now” or “Skip; Get later”.
Select the one that makes sense to you at that time.
l If a download is mandatory, only “Get Update now" displays and you must perform the download.
A message displays when the download is complete:
l If you need to reboot the system, the prompt "Restart now" displays. Select this to restart the
system.
l If it is not necessary to reboot, simply select Continue to return to the Home screen.
IMPORTANT:
Do not remove power or the Internet connection to the Pitney Bowes Data Centre during a system upgrade or
rates download.
Wait until the meter has finished processing before disconnecting the meter. You will know this has occurred
when the meter's Home screen showing postage and date displays
Types of Downloads/Updates Available
The following downloads/updates are available:
System Update
If there has been an important update to your system, you will be notified that a required update is
necessary. To initiate a system update, follow the Procedure for Downloading New Postal Rates,
Updates, Inscriptions,and Ads.
Meter Updates and Inspections
Pitney Bowes Operator Guide February, 2017 Page 142 of 226
To Next Page
Loading...
