Pitney Bowes Epic - Adjusting the Buffer Chassis Side Guides

Adjusting the Buffer Chassis Side Guides
Thebufferchassissideguidesarelocatedontheexitsideofthebufferandentrancetothechassis.They
guidethematerialfromthebuffertothechassis.Oncethechassissideguideshavebeenadjusted,you
canadjustthebufferchassissideguides.
1. Verifythedocumentcomingfromtheinputiscentered.
2. Openthebuffercovers.
3. Alignthebufferguidetobeslightlyinsidethechassissideguide,butwideenoughforthecollation
tofitthrough.Alignthemsothebufferguidesareapproximately1mminsidethechassisguides.
Item Description
1 BufferChassisGuide
2 ChassisSideGuide
AlignBufferSideGuidewithChassisSideGuides
Operator Adjustments
Pitney Bowes Epic Select Operator Guide December,2017 Page 105 of 288