Pitney Bowes Epic - Powering down the DC Computer

Powering Down the DC Computer
WhenyouareloggedinasanOperator,youcanpowerdowntheDCcomputerfromthemainmenubar
onthemainDCscreen.
1. ClickControlontheDCmainmenubar.
2. SelectPowerDownandclickYeswhenprompted.ThisshutsdowntheDCcomputer.
Note:
IfyouareloggedinasanOperator,youcannotexitDC,youcanonlypowerdowntheDCcomputer.
Using Direct Connect
Pitney Bowes Epic Select Operator Guide December,2017 Page 33 of 288