Pitney Bowes Epic - Power

Power
System Power
Theinserterreceivesitspowerfromacustomerprovided,singledrop,externalconnection.
General Power Safety
l Usethepowercordsuppliedwiththemachinechassisatthepowerentryandplugitintoa
properlygrounded(earthed)andeasilyaccessiblewalloutletlocatednearthemachine.Failureto
properlyground(earth)themachinecanresultinseverepersonalinjuryand/orfire.
l ThepowercordwallplugistheprimarymeansofdisconnectingthemachinefromtheACpower
supplyforLockOut/TagOut(LOTO).
l Do notuseanadapterplugonthelinecordorwalloutlet.
l Do notroutethepowercordoversharpedgesortrapitbetweenfurniture.
l Ensurethereisnostrainonthepowercordwhereitbecomesjammedbetweentheequipment,
wallsorfurniture.
l Becertaintheareainfrontofthewallreceptacleintowhichthemachineispluggedisfreefrom
obstruction.
l Forinputandoutputmodules-powerisdistributedfromthechassis.UsetheACconnectors
suppliedwiththemodulestoconnecttosystempower.Do notconnectexternaldevicestothe
inserter.
Safety
Pitney Bowes Epic Select Operator Guide December,2017 Page 3 of 288