Pitney Bowes Epic - Removing Material Jams in the Friction Feeder

Removing Material Jams in the Friction Feeder
Therearethreeareasinthefrictionfeederwherejamsmayoccur:
l Feeder deck
l Separator bridge
l Transport
Feeder Deck
Toremovejamsfromthefrictionfeederdeck:
1. Pulloutthelockingpinandliftupthefeederslowlyuntilthepinlatchesin.
2. Removethejam.
3. Closethefeeder.
Separator Bridge
Toremovejamsfromtheseparatorbridge:
Error Recovery
Pitney Bowes Epic Select Operator Guide December,2017 Page 197 of 288