Pitney Bowes Epic - Removing Mail from the Flat Conveyor

Removing Mail from the Flat Conveyor
Flatmaterialwillbestackedontheflatconveyorusuallylocatedunderthelastverticalstacker.(The flat
conveyor can be positioned under any vertical stacker, generally it is located under the last one.)
Duringthejobthefinishedflatmailpiecesarestackedundertheverticalstackerontotheconveyor.As
moremailisprocessedtheconveyortransfersthefinishedmaterialoutfromtheunderthevertical
stacker.
Tomanuallyremovethemailpiecesfromtheconveyor:
1. Pressthebuttonlocatedontheendoftheconveyortoturnthebeltonandmovetheflatmailpieces
outfromundertheverticalstackeranddownthebelt.
2. Neatlystackthemailandremoveitfromthebelt.
FlatConveyor-Button

Running the System
Pitney Bowes Epic Select Operator Guide December,2017 Page 184 of 288