Pitney Bowes Epic - Page 189

4. Lowerthepaddlebacktothebeltbetweenthetwomailpiecesandthenslidethatstackofmailto
therightofthepaddleintothemailtray.
Item Description
1 Paddle
2 Mailtobemovedtomailtray
RemoveMail
On Edge Stacker Paddle and Switch
TheOnEdgeStackersignalstheoperatorwhenthestackerbeltisaboutthreequartersfullwitha
messageonthebottomofthemainDCscreeninthealarmmessagebox..Whenthepaddlereachesthe
switchlocatedonthestacker,themachinewillcometoacontrolledstopandindicatethestackerisfullby
displayingamessageonthescreen.
l Themachinewillnotstartwhilethepaddleispressingontheswitch.
l Thisfeatureworksonlywhenthepaddleisinthedownpositionandtheinserterisrunning.
Running the System
Pitney Bowes Epic Select Operator Guide December,2017 Page 183 of 288