Pitney Bowes Epic - Transport Envelope Setup (Xport Setup)

Transport Envelope Setup (Xport Setup)
Note:
Thissetupisusedonlywhentheenvelopeflapmeasure3/4-inch(19mm)orless.
Whenthefrictionfeederisarmed(materialisreadytofeed)theenvelopeisnotdrivenoutfarenough.It
preventsthepushersfromhittingoropeningtheenvelopeflap.
Toadjustthetransportenvelopesetup:
1. LoginasKeyOperatoraccesslevelorhigher.
2. ClickthedesiredFeederobjectonthemainDCscreenandselectSetupfromthedrop-down.
3. ClicktheXportSetuptab.
4. SelecttheFlapfirst,short-flapreturnenvelopecheckbox.
5. ClickOK.
Operator Adjustments
Pitney Bowes Epic Select Operator Guide December,2017 Page 153 of 288