Pitney Bowes Epic - Adding Sealer Fluid

Adding Sealer Fluid
Thesealeruseswatertosealenvelopes.thesealertankholdsfivegallonsofwater.DCdisplaysa
SupplyLow[WaterTank]@Sealermessagewhenthesealertanksneedstoberefilled.
Ifthesealertankisnotrefilled,eventuallythesealerbrushdetectsnowaterflow,andthesystemstops.
1. Fillacontainer(thathasafunnelorspout)withfluid.
2. Openthesealerreservoircover.
3. Carefullypourwaterintothereservoir;donotoverfillthecontainer.
4. Closethesealerreservoircover.
Item Description
1 SealerReservoir (cover open)
2 OverflowReservoir (partially pulled out)
SealerandOverflowReservoirs
Running the System
Pitney Bowes Epic Select Operator Guide December,2017 Page 185 of 288