Pitney Bowes Epic - Adjusting Amount of Sealer Fluid Applied

Adjusting Amount of Sealer Fluid Applied
Thesealeriswheretheenvelopeflapismoistenedandtheflapisclosed.Operatorscanadjustthe
amountofsealerfluidappliedusingDC.Therearenomechanicaladjustmentsavailabletooperatorson
thesealer.
Adjusting Amount of Sealer Fluid
Thedefaultamountoffluidappliedtotheenvelopeisdeterminedbytheenvelopeparametersenteredin
theEngineSetupscreeninDC.Theamountoffluidusedtosealtheenvelopesmayneedtobeadjusted
duringmailprocessingbasedonthetypeofenvelopematerial.
1. ClicktheSealerobjectonthemainDCscreenandselectSealerControlfromthedrop-down.
SealerObject
Operator Adjustments
Pitney Bowes Epic Select Operator Guide December,2017 Page 80 of 288