Pitney Bowes Epic - Using the Wedge Accessory on the Rotary Feeder

Using the Wedge Accessory on the Rotary Feeder
Thewedgeisanoptionalaccessorythatcanbeusedtohelpsupportcertaintypesofmaterialasitisfed
intotheinserterfromtherotaryfeeder.Thewedgeliftsthetrailedgeofthematerialtogivethematerial
moresupport.
Refertothetableincludedheretoseeifthematerialyouarerunningrequirestheuseofthewedge.
MaterialType Wedge
(SingleSheet(#10,A4,half-foldnon-glossy,half-foldglossy) optional
Folded,perfume optional
BRE optional
Booklet(thick.125"max) yes
Booklet(thin) yes
Installing the Wedge on the Rotary Feeder
1. Liftthewedgeoffthebackwallofthefeeder.

Wedge
Operator Adjustments
Pitney Bowes Epic Select Operator Guide December,2017 Page 136 of 288