Pitney Bowes Epic - Reloading the Envelope Feeder

Reloading the Envelope Feeder
Astheenvelopefeederempties,thefeederpaddlekeepsconstantpressureontheenvelopestackand
movesittowardtheenvelopefeedhead.Whenthestackreachesapproximatelythelast500envelopes,
a“BINLOW”warningdisplaysontheDCmainscreen.Atthispoint,whentheoperatoraddsmore
envelopestothefeeder,thesystemwillcontinuetorunandthewarningmessageturnsoff.
Followthesestepstoreloadenvelopeswhiletheinserterisrunning.
Caution:PinchPoint
Theenvelopesrestonrotatingbarswhilethemachineisrunning.Donotallowyour
fingerstocomeintocontactwiththesebarswhilethemachineisrunning.

Running the System
Pitney Bowes Epic Select Operator Guide December,2017 Page 176 of 288