Pitney Bowes Epic - Epic Buffer with TNT (Y574)

Epic Buffer with TNT (Y574)
TheBufferwithTNTmodulecantwistfoldedcollations180°totherequiredorientationforthechassis.
Description
TheY574EpicBufferwithTNTincludes:
l AnintegratedServo8StageBufferthattransportsandstagescollationsfromthefolderoutputto
theTwistNoTwist(TNT)
l Hand-offstationthattransfersthecollationstothechassis
l NoChangeOvermoduleoption(requiresflatskey,achargeableitem)
Standard Features
TheY574BufferwithTNTisdesignedfortheEpicplatformandincludes:
l Buffersandsynchronizesthecollatedmaterialtooptimizetheperformanceoftheinput.
l The8StageBufferstagesfinishedcollationsandsubsequentlyreducethenumberofdrycycles
perhourdependingonthecollationsize,thusoptimizechassisutilization.
l Whenactivated,theTNTmoduletwiststhecollatedmaterial180degree.
l Whennotactivated,thecollationpassesthroughtheTNT.
l TNTjobsetupisdonethroughtheDirectConnectoperatingsystem.
l Themoduleoperatesatspeedsof-21,000cyclesperhourintri-foldmode,18,000cyclesperhour
inhalf-foldmode,and14,000cyclesperhourinflatmode.
Specifications
Pitney Bowes Epic Select Operator Guide December,2017 Page 272 of 288