Pitney Bowes Epic - Page 279

Material Specifications
Flats-PassThru Minimum Maximum
PaperLength 8"(203mm)* 9"(229mm)
Paperwidth(trimmed) 7"(179mm) 12"(305mm)
Thickness Singlesheet 20sheets20lb(80gsm)

Flats-P2L90°(TNTPassThru) Minimum Maximum
PaperLength(beforerotation) 8"(203mm)* 12"(305mm)
Paperwidth(trimmed,beforerotation) 7"(179mm) 9"(229mm)
Thickness Singlesheet 10sheets20lb(80gsm)

Folded-TNTActiveorPassThru Minimum Maximum
PaperLength(beforerotation) 3.5"(89mm) 6.5"(165mm)
PaperWidth(trimmed,beforerotation) 7"(179mm) 12"(305mm)
Thickness Singlesheet 16sheets20lb(80gsm)half-fold
10sheets20lb(80gsm)tri-fold
*The TNT does not support twisting of flat materials; any rotation is limited to 14,000.
Specifications
Pitney Bowes Epic Select Operator Guide December,2017 Page 273 of 288