Pitney Bowes Epic - Setting Backup Feeders (Backup Feed Mode)

Setting Backup Feeders (Backup Feed Mode)
Youcanselectafeedertobackupaprimaryfeederwhenitrunslowonmaterialduringajobrun.When
thismodeisselectedtheFeederobjecthasgreen stripes.
About Backup Feeder Locations
Thebackupfeedermustbedownstream(thedirectionthepapertravels)oftheprimaryfeeder.Inthis
examplethefollowingfeedersareassigned:
l Feeder#3istheprimaryfeederandsetinbackupmode
l Feeder#2(downstream)issettobackupFeeder#3
l WhenFeeder#3runslowonmaterial,Feeder#2takesoveruntilFeeder#3isreloadedandina
readystate
Item Description
1 Feeder#3
2 BackupFeeder#2
3 BackupFeeder(green stripes)
BackupFeederLocations
Operator Adjustments
Pitney Bowes Epic Select Operator Guide December,2017 Page 150 of 288